FPE-8000-FMR, Avenar Remote Keypad
- Stock Status: In Stock
- Brand: Bosch
- Model: FPE-8000-FMR
- Weight: 2,800.00g
- Dimensions: 280.10mm x 339.00mm x 80.20mm
- SKU: FPE-8000-FMR
- HS CODE: 847190
- MPN: FPE-8000-FMR
FPE-8000-FMR, Avenar Remote Keypad
The remote keypad allows decentralized operation of a fire safety system. The design of the graphical user interface is identical to the fire panels. A color display shows all messages. The touch screen is for operation of a specific panel or the entire system. The user- friendly interface adapts to various situations. This causes correct operation that is simple and clear as well as targeted and intuitive.
Panels and keypads of the AVENAR series and of the FPA-5000 series (MPC-xxxx-B and MPC-xxxx-C) can be combined in one panel network using the Ethernet and the CAN bus interfaces.
In combination with an AVENAR panel 8000, the keypad can be used as a redundant panel controller. In this case, it cannot be used as a remote keypad. Power can be supplied by the panel and/or an external power supply unit.
The housing of the remote keypad is designed for proper and clean installation at highly visible locations. It allows tilted installation and surface or flush wall mounting without requiring additional installation frames.
Main Features
- User interface identical to fire panel
- High resolution display with bright colors to indicate alarms and events
- 8" touch pad with fixed and programmable buttons, thus adaptable to the situation
- Clean design for surface and flush mounting u Alternative use as redundant panel controller
Functions
Alarm indication
All messages are shown on the display with a bright color. The displayed messages contain the following information:
Message type
- Type of the triggering element
- Description of the exact location of the triggering element
- Logical zone and sub-address of the triggering element
Operation and processing of messages
For operating the panel, an 8 inch touch pad as input medium is put upon the display. There are 6 buttons with fixed functionality as well as 3 programmable function keys.
Examples for the assignment of the function keys:
- Set the panel controller to day mode, set the panel controller to night mode
- Enable detection points or outputs, disable detection points or outputs
- Set standard sensor sensitivity, set alternative sensor sensitivity
Each function key has a virtual status indicator.
At any time, an operator with sufficient user rights can control the function keys.
Networking
Up to 32 panel controllers, remote keypads and OPC servers can be combined to form a network.
Panels and keypads display all messages, or you can form a group of panels and keypads. Within one group, only messages of this group are displayed.
A variety of fire alarm network topologies are possible:
- CAN loop Ethernet loop
- Ethernet/CAN double loop
- CAN loop with Ethernet segments
- Ethernet backbone with sub-loops (Ethernet/CAN)
